>>Introduction
of nozzle<<
1.
Extreme tip hardness processed to 87 HRC.
2. A mirror finish in thetube tips and a smooth bore.
3. Concentricity of bore to outer diameter within 0.05 TIR.
4. Each tube is inspected at every stage of manufacture using the most up-to-date
equipment to ensure specification conformity.
5. Small batches catered for.
6. Non-standard tubes can be supplied with bore sizes from 0.3mm and upwards. Outer
diameters from 0.8mm and upwards.
7. Samples supplied.。
|